← All articles

Insights · November 12, 2026

DWG and DXF Drawings: What Automated Review Can Read, What It Cannot, and How to Export

DWG and DXF Drawings: What Automated Review Can Read, What It Cannot, and How to Export

A PDF shows you what a drawing looks like. A DWG or DXF file tells you what the drawing is made of: which lines are walls, which numbers are dimensions, which text belongs to which room. That is why more and more review work starts from the CAD file rather than from the plot. It is also why the quality of the export matters: a drawing that looks perfect on screen can be almost unreadable to software if it was drawn or saved in the wrong way.

This article explains what automated review can extract from DWG and DXF files, where it honestly fails, and how to prepare an export that reads well. It is written for designers sending files out for checking and for owners, contractors and lenders who receive CAD files and want to know what can be done with them.

DWG and DXF in one paragraph each

DWG is the native binary format of AutoCAD and is read and written by most CAD platforms. Its internal structure has changed over the years, and each change is identified by a format version (files are commonly saved as "AutoCAD 2013" or "AutoCAD 2018" format, for example). Newer software opens older versions; older or third-party readers do not always open the newest.

DXF (Drawing Exchange Format) is a documented exchange format that describes the same kinds of objects in a form other programs can parse. It is often the safest choice when a file has to travel between different software, at the cost of larger files and, occasionally, some loss of application-specific objects.

What automated review can read

When a file is drawn with ordinary CAD objects, a lot of useful information is available to a checking tool:

From these pieces, typical cross-checks become possible: sheet index versus layouts actually present, room schedule areas versus measured outlines, door tags versus door schedule rows, levels and heights in sections versus the code summary, and text references such as "see detail 5/A-501" versus the details that exist.

What automated review cannot read reliably

It is better to know the limits before you send a file than to read a report that is silent on half the set. These are the common failure cases.

Corrupted or partially saved files

A file that crashed during saving, was truncated in transfer, or was produced by a converter that wrote invalid data may open with errors or not at all. CAD software often repairs such files with a recovery command; a checking tool may skip damaged objects or refuse the file. If your own software reports errors on opening, fix them before sending.

Rooms drawn without closed outlines

Many plans are drawn with walls as separate lines and room names as free-floating text. A person sees a room; software sees lines that happen to form a rectangle. Without a closed polyline, an area object or a bounded hatch, there is no reliable room boundary, so areas cannot be computed and compared with the schedule. Gaps of a fraction of an inch between line ends are enough to break automatic boundary detection.

Scanned plots and raster images

Some "DWG" files are really a scanned drawing placed as an image inside a CAD file, sometimes with a few lines traced over the top. There are no dimension objects, no layers, no text objects: just pixels. Text recognition can read some of the printed words, but dimensions, areas and object counts are not available the way they are in a vector drawing. If the only source you have is a scan, send it as a PDF or image and expect a narrower check.

Other common gaps

None of these makes a file useless. They narrow what can be checked automatically, and a careful report should say which parts it could not read rather than staying silent.

How to export so the file reads well

A few minutes of preparation usually decides whether a check works from structured data or from guesswork.

  1. Save to a widely supported version. Use your software's "Save As" or export to DWG 2013 or DWG 2018 format, or to DXF, unless the recipient asks for something else. Avoid the newest format if you are not sure the reader supports it.
  2. Bind or include external references. Bind xrefs into the drawing, or use your software's transmittal or packaging command so that every referenced file travels with the main one. Send images and fonts that the drawing depends on.
  3. Keep layers. Do not flatten everything onto layer 0 and do not explode blocks before export. Layer names and block attributes are information, not clutter.
  4. Include all sheets. Keep every layout that forms part of the set, with title blocks filled in, and make the sheet index match the layouts. If the set is split across several files, send all of them and name them by sheet number.
  5. Close your room outlines. If room areas matter (they usually do), draw them as closed polylines or area objects on a dedicated layer, and keep the room name text inside the boundary.
  6. Use real dimensions. Use dimension objects associated with geometry, and avoid overriding the measured value with typed text unless there is a reason, which should then be noted.
  7. Purge and repair the file in your CAD software. Remove unused objects and run the built-in error check and repair before saving. Smaller, clean files read faster and more completely.
  8. Send the PDF set as well. The plotted PDF shows what the designer intended to issue. Having both lets a check compare the CAD content with the issued sheets.

Quick pre-send checklist

CheckWhy it matters
File opens without errors in your own softwareDamaged objects may be skipped by the reader
Saved as DWG 2013/2018 or DXFBroadest compatibility with other readers
Xrefs bound or includedMissing references show as empty areas
Layers and blocks intactNeeded to tell walls from text and to count doors
All layouts present, index matchesSheets missing from the file cannot be checked
Rooms as closed outlinesNeeded to compute and compare areas
Dimensions are dimension objectsNeeded to compare stated and measured values
No scanned sheets disguised as CADRaster content gives only a narrow, text-based check

What the CAD file does not settle

Even a perfectly structured drawing only shows what the designer drew. A check of the CAD file can find inconsistencies between sheets, between drawings and schedules, and between drawings and stated requirements. It cannot confirm that the design is buildable on your site, that the structure is adequate, or that the building department will accept the design. Those questions belong to licensed professionals and to plan review. For a broader list of what to look for across a full set, see the 12-point construction document review checklist.

CAD files are also the usual source of quantities. If an estimate was produced from the drawings, the same structured data lets you test it: see how to check a quantity takeoff and where construction budgets leak. Areas that do not match between the CAD outline, the room schedule and the estimate are one of the fastest ways to find money that is about to be spent twice or not at all.

Where MEXUM fits

MEXUM accepts DWG and DXF drawings together with PDFs, scans, IFC models, specifications, estimates and contracts, and checks them against each other and against the codes of the project region. The written conclusion arrives as a PDF within 24 hours, and each finding carries a quote and a page or sheet reference. It works best with files prepared as described above; it does not replace plan review or the judgment of the architect or engineer of record.

Frequently asked questions

Which DWG version should I export for an outside review?

Unless the recipient asks for something else, save as DWG 2013 or DWG 2018 format, or as DXF. These are widely supported by other readers. The very newest format may not open in every tool, and older formats can lose some objects.

Why does a check fail to compute room areas from my DWG?

Usually because rooms are drawn as separate wall lines rather than closed polylines, area objects or bounded hatches. Software needs a closed boundary to calculate an area. Small gaps between line ends are enough to break it.

Can automated review read a scanned drawing saved as DWG?

Only partly. A scan inside a CAD file is an image with no layers, dimension objects or text objects. Text recognition may read printed words, but areas, dimensions and object counts are not available as they are in a vector drawing.

Should I send the PDF set together with the CAD files?

Yes. The PDF shows the sheets as issued, and the CAD file shows how they were built. Having both lets a reviewer compare them and catch sheets that differ between the two.